man
1 openssl-cmp
OPENSSL-CMP(1ossl) OpenSSL OPENSSL-CMP(1ossl)
NAME
openssl-cmp - Certificate Management Protocol (CMP, RFC 4210)
application
SYNOPSIS
openssl cmp [-help] [-config filename] [-section names] [-verbosity
level]
Generic message options:
[-cmd ir|cr|kur|p10cr|rr|genm] [-infotype name] [-geninfo OID:int:N]
Certificate enrollment options:
[-newkey filename|uri] [-newkeypass arg] [-subject name] [-days number]
[-reqexts name] [-sans spec] [-san_nodefault] [-policies name]
[-policy_oids names] [-policy_oids_critical] [-popo number] [-csr
filename] [-out_trusted filenames|uris] [-implicit_confirm]
[-disable_confirm] [-certout filename] [-chainout filename]
Certificate enrollment and revocation options:
[-oldcert filename|uri] [-issuer name] [-serial number] [-revreason
number]
Message transfer options:
[-server [http[s]://][userinfo@]host[:port][/path][?query][#fragment]]
[-proxy [http[s]://][userinfo@]host[:port][/path][?query][#fragment]]
[-no_proxy addresses] [-recipient name] [-path remote_path]
[-keep_alive value] [-msg_timeout seconds] [-total_timeout seconds]
Server authentication options:
[-trusted filenames|uris] [-untrusted filenames|uris] [-srvcert
filename|uri] [-expect_sender name] [-ignore_keyusage]
[-unprotected_errors] [-srvcertout filename] [-extracertsout filename]
[-cacertsout filename] [-oldwithold filename] [-newwithnew filename]
[-newwithold filename] [-oldwithnew filename]
Client authentication and protection options:
[-ref value] [-secret arg] [-cert filename|uri] [-own_trusted
filenames|uris] [-key filename|uri] [-keypass arg] [-digest name] [-mac
name] [-extracerts filenames|uris] [-unprotected_requests]
Credentials format options:
[-certform PEM|DER] [-keyform PEM|DER|P12|ENGINE] [-otherpass arg]
[-engine id] [-provider name] [-provider-path path] [-propquery propq]
Random state options:
[-rand files] [-writerand file]
TLS connection options:
[-tls_used] [-tls_cert filename|uri] [-tls_key filename|uri]
[-tls_keypass arg] [-tls_extra filenames|uris] [-tls_trusted
filenames|uris] [-tls_host name]
Client-side debugging options:
[-batch] [-repeat number] [-reqin filenames] [-reqin_new_tid] [-reqout
filenames] [-rspin filenames] [-rspout filenames] [-use_mock_srv]
Mock server options:
[-port number] [-max_msgs number] [-srv_ref value] [-srv_secret arg]
[-srv_cert filename|uri] [-srv_key filename|uri] [-srv_keypass arg]
[-srv_trusted filenames|uris] [-srv_untrusted filenames|uris]
[-ref_cert filename|uri] [-rsp_cert filename|uri] [-rsp_extracerts
filenames|uris] [-rsp_capubs filenames|uris] [-rsp_newwithnew
filename|uri] [-rsp_newwithold filename|uri] [-rsp_oldwithnew
filename|uri] [-poll_count number] [-check_after number]
[-grant_implicitconf] [-pkistatus number] [-failure number]
[-failurebits number] [-statusstring arg] [-send_error]
[-send_unprotected] [-send_unprot_err] [-accept_unprotected]
[-accept_unprot_err] [-accept_raverified]
Certificate verification options, for both CMP and TLS:
[-allow_proxy_certs] [-attime timestamp] [-no_check_time]
[-check_ss_sig] [-crl_check] [-crl_check_all] [-explicit_policy]
[-extended_crl] [-ignore_critical] [-inhibit_any] [-inhibit_map]
[-partial_chain] [-policy arg] [-policy_check] [-policy_print]
[-purpose purpose] [-suiteB_128] [-suiteB_128_only] [-suiteB_192]
[-trusted_first] [-no_alt_chains] [-use_deltas] [-auth_level num]
[-verify_depth num] [-verify_email email] [-verify_hostname hostname]
[-verify_ip ip] [-verify_name name] [-x509_strict] [-issuer_checks]
DESCRIPTION
The cmp command is a client implementation for the Certificate
Management Protocol (CMP) as defined in RFC4210. It can be used to
request certificates from a CA server, update their certificates,
request certificates to be revoked, and perform other types of CMP
requests.
OPTIONS
-help
Display a summary of all options
-config filename
Configuration file to use. An empty string "" means none. Default
filename is from the environment variable "OPENSSL_CONF".
-section names
Section(s) to use within config file defining CMP options. An
empty string "" means no specific section. Default is "cmp".
Multiple section names may be given, separated by commas and/or
whitespace (where in the latter case the whole argument must be
enclosed in "..."). Contents of sections named later may override
contents of sections named before. In any case, as usual, the
"[default]" section and finally the unnamed section (as far as
present) can provide per-option fallback values.
-verbosity level
Level of verbosity for logging, error output, etc. 0 = EMERG, 1 =
ALERT, 2 = CRIT, 3 = ERR, 4 = WARN, 5 = NOTE, 6 = INFO, 7 = DEBUG,
8 = TRACE. Defaults to 6 = INFO.
Generic message options
-cmd ir|cr|kur|p10cr|rr|genm
CMP command to execute. Currently implemented commands are:
ir - Initialization Request
cr - Certificate Request
p10cr - PKCS#10 Certification Request (for legacy support)
kur - Key Update Request
rr - Revocation Request
genm - General Message
ir requests initialization of an end entity into a PKI hierarchy by
issuing a first certificate.
cr requests issuing an additional certificate for an end entity
already initialized to the PKI hierarchy.
p10cr requests issuing an additional certificate similarly to cr
but using legacy PKCS#10 CSR format.
kur requests a (key) update for an existing certificate.
rr requests revocation of an existing certificate.
genm requests information using a General Message, where optionally
included InfoTypeAndValues may be used to state which info is of
interest. Upon receipt of the General Response, information about
all received ITAV infoTypes is printed to stdout.
-infotype name
Set InfoType name to use for requesting specific info in genm,
e.g., "signKeyPairTypes". So far, there is specific support for
"caCerts" and "rootCaCert".
-geninfo OID:int:N
generalInfo integer values to place in request PKIHeader with given
OID, e.g., "1.2.3.4:int:56789".
Certificate enrollment options
-newkey filename|uri
The source of the private or public key for the certificate being
requested. Defaults to the public key in the PKCS#10 CSR given
with the -csr option, the public key of the reference certificate,
or the current client key.
The public portion of the key is placed in the certification
request.
Unless -cmd p10cr, -popo -1, or -popo 0 is given, the private key
will be needed as well to provide the proof of possession (POPO),
where the -key option may provide a fallback.
-newkeypass arg
Pass phrase source for the key given with the -newkey option. If
not given here, the password will be prompted for if needed.
For more information about the format of arg see
openssl-passphrase-options(1).
-subject name
X.509 Distinguished Name (DN) to use as subject field in the
requested certificate template in IR/CR/KUR messages. If the NULL-
DN ("/") is given then no subject is placed in the template.
Default is the subject DN of any PKCS#10 CSR given with the -csr
option. For KUR, a further fallback is the subject DN of the
reference certificate (see -oldcert) if provided. This fallback is
used for IR and CR only if no SANs are set.
If provided and neither of -cert, -oldcert, or -csr is given, the
subject DN is used as fallback sender of outgoing CMP messages.
The argument must be formatted as
/type0=value0/type1=value1/type2=.... Special characters may be
escaped by "\" (backslash); whitespace is retained. Empty values
are permitted, but the corresponding type will not be included.
Giving a single "/" will lead to an empty sequence of RDNs (a NULL-
DN). Multi-valued RDNs can be formed by placing a "+" character
instead of a "/" between the AttributeValueAssertions (AVAs) that
specify the members of the set. Example:
"/DC=org/DC=OpenSSL/DC=users/UID=123456+CN=John Doe"
-days number
Number of days the new certificate is requested to be valid for,
counting from the current time of the host. Also triggers the
explicit request that the validity period starts from the current
time (as seen by the host).
-reqexts name
Name of section in OpenSSL config file defining certificate request
extensions. If the -csr option is present, these extensions
augment the extensions contained the given PKCS#10 CSR, overriding
any extensions with same OIDs.
-sans spec
One or more IP addresses, email addresses, DNS names, or URIs
separated by commas or whitespace (where in the latter case the
whole argument must be enclosed in "...") to add as Subject
Alternative Name(s) (SAN) certificate request extension. If the
special element "critical" is given the SANs are flagged as
critical. Cannot be used if any Subject Alternative Name extension
is set via -reqexts.
-san_nodefault
When Subject Alternative Names are not given via -sans nor defined
via -reqexts, they are copied by default from the reference
certificate (see -oldcert). This can be disabled by giving the
-san_nodefault option.
-policies name
Name of section in OpenSSL config file defining policies to be set
as certificate request extension. This option cannot be used
together with -policy_oids.
-policy_oids names
One or more OID(s), separated by commas and/or whitespace (where in
the latter case the whole argument must be enclosed in "...") to
add as certificate policies request extension. This option cannot
be used together with -policies.
-policy_oids_critical
Flag the policies given with -policy_oids as critical.
-popo number
Proof-of-possession (POPO) method to use for IR/CR/KUR; values:
"-1"..<2> where "-1" = NONE, 0 = RAVERIFIED, 1 = SIGNATURE
(default), 2 = KEYENC.
Note that a signature-based POPO can only be produced if a private
key is provided via the -newkey or -key options.
-csr filename
PKCS#10 CSR in PEM or DER format containing a certificate request.
With -cmd p10cr it is used directly in a legacy P10CR message.
When used with -cmd ir, cr, or kur, it is transformed into the
respective regular CMP request. In this case, a private key must
be provided (with -newkey or -key) for the proof of possession
(unless -popo -1 or -popo 0 is used) and the respective public key
is placed in the certification request (rather than taking over the
public key contained in the PKCS#10 CSR).
PKCS#10 CSR input may also be used with -cmd rr to specify the
certificate to be revoked via the included subject name and public
key. Its subject is used as fallback sender in CMP message headers
if -cert and -oldcert are not given.
-out_trusted filenames|uris
Trusted certificate(s) to use for validating the newly enrolled
certificate. During this verification, any certificate status
checking is disabled.
Multiple sources may be given, separated by commas and/or
whitespace (where in the latter case the whole argument must be
enclosed in "..."). Each source may contain multiple certificates.
The certificate verification options -verify_hostname, -verify_ip,
and -verify_email only affect the certificate verification enabled
via this option.
-implicit_confirm
Request implicit confirmation of newly enrolled certificates.
-disable_confirm
Do not send certificate confirmation message for newly enrolled
certificate without requesting implicit confirmation to cope with
broken servers not supporting implicit confirmation correctly.
WARNING: This leads to behavior violating RFC 4210.
-certout filename
The file where any newly enrolled certificate should be saved.
-chainout filename
The file where the chain of any newly enrolled certificate should
be saved.
Certificate enrollment and revocation options
-oldcert filename|uri
The certificate to be updated (i.e., renewed or re-keyed) in Key
Update Request (KUR) messages or to be revoked in Revocation
Request (RR) messages. For KUR the certificate to be updated
defaults to -cert, and the resulting certificate is called
reference certificate. For RR the certificate to be revoked can
also be specified using -csr. -oldcert and -csr is ignored if
-issuer and -serial is provided.
The reference certificate, if any, is also used for deriving
default subject DN and Subject Alternative Names and the default
issuer entry in the requested certificate template of an IR/CR/KUR.
Its public key is used as a fallback in the template of
certification requests. Its subject is used as sender of outgoing
messages if -cert is not given. Its issuer is used as default
recipient in CMP message headers if neither -recipient, -srvcert,
nor -issuer is given.
-issuer name
X.509 Distinguished Name (DN) use as issuer field in the requested
certificate template in IR/CR/KUR/RR messages. If the NULL-DN
("/") is given then no issuer is placed in the template.
If provided and neither -recipient nor -srvcert is given, the
issuer DN is used as fallback recipient of outgoing CMP messages.
The argument must be formatted as
/type0=value0/type1=value1/type2=.... For details see the
description of the -subject option.
-serial number
Specify the Serial number of certificate to be revoked in
revocation request. The serial number can be decimal or hex (if
preceded by "0x")
-revreason number
Set CRLReason to be included in revocation request (RR); values:
0..10 or "-1" for none (which is the default).
Reason numbers defined in RFC 5280 are:
CRLReason ::= ENUMERATED {
unspecified (0),
keyCompromise (1),
cACompromise (2),
affiliationChanged (3),
superseded (4),
cessationOfOperation (5),
certificateHold (6),
-- value 7 is not used
removeFromCRL (8),
privilegeWithdrawn (9),
aACompromise (10)
}
Message transfer options
-server [http[s]://][userinfo@]host[:port][/path][?query][#fragment]
The host domain name or IP address and optionally port of the CMP
server to connect to using HTTP(S). IP address may be for v4 or
v6, such as 127.0.0.1 or "[::1]" for localhost.
This option excludes -port and -use_mock_srv. It is ignored if
-rspin is given with enough filename arguments.
If the scheme "https" is given, the -tls_used option is implied.
When TLS is used, the default port is 443, otherwise 80. The
optional userinfo and fragment components are ignored. Any given
query component is handled as part of the path component. If a
path is included it provides the default value for the -path
option.
-proxy [http[s]://][userinfo@]host[:port][/path][?query][#fragment]
The HTTP(S) proxy server to use for reaching the CMP server unless
-no_proxy applies, see below. The proxy port defaults to 80 or 443
if the scheme is "https"; apart from that the optional "http://" or
"https://" prefix is ignored (note that using TLS may be required
by -tls_used or -server with the prefix "https"), as well as any
path, userinfo, and query, and fragment components. Defaults to
the environment variable "http_proxy" if set, else "HTTP_PROXY" in
case no TLS is used, otherwise "https_proxy" if set, else
"HTTPS_PROXY". This option is ignored if -server is not given.
-no_proxy addresses
List of IP addresses and/or DNS names of servers not to use an
HTTP(S) proxy for, separated by commas and/or whitespace (where in
the latter case the whole argument must be enclosed in "...").
Default is from the environment variable "no_proxy" if set, else
"NO_PROXY". This option is ignored if -server is not given.
-recipient name
Distinguished Name (DN) to use in the recipient field of CMP
request message headers, i.e., the CMP server (usually the
addressed CA).
The recipient field in the header of a CMP message is mandatory.
If not given explicitly the recipient is determined in the
following order: the subject of the CMP server certificate given
with the -srvcert option, the -issuer option, the issuer of the
certificate given with the -oldcert option, the issuer of the CMP
client certificate (-cert option), as far as any of those is
present, else the NULL-DN as last resort.
The argument must be formatted as
/type0=value0/type1=value1/type2=.... For details see the
description of the -subject option.
-path remote_path
HTTP path at the CMP server (aka CMP alias) to use for POST
requests. Defaults to any path given with -server, else "/".
-keep_alive value
If the given value is 0 then HTTP connections are closed after each
response (which would be the default behavior of HTTP 1.0) even if
a CMP transaction needs more than one round trip. If the value is
1 or 2 then for each transaction a persistent connection is
requested. If the value is 2 then a persistent connection is
required, i.e., an error occurs if the server does not grant it.
The default value is 1, which means preferring to keep the
connection open.
-msg_timeout seconds
Number of seconds a CMP request-response message round trip is
allowed to take before a timeout error is returned. A value <= 0
means no limitation (waiting indefinitely). Default is to use the
-total_timeout setting.
-total_timeout seconds
Maximum total number of seconds a transaction may take, including
polling etc. A value <= 0 means no limitation (waiting
indefinitely). Default is 0.
Server authentication options
-trusted filenames|uris
The certificate(s), typically of root CAs, the client shall use as
trust anchors when validating signature-based protection of CMP
response messages. This option is ignored if the -srvcert option
is given as well. It provides more flexibility than -srvcert
because the CMP protection certificate of the server is not pinned
but may be any certificate from which a chain to one of the given
trust anchors can be constructed.
If none of -trusted, -srvcert, and -secret is given, message
validation errors will be thrown unless -unprotected_errors permits
an exception.
Multiple sources may be given, separated by commas and/or
whitespace (where in the latter case the whole argument must be
enclosed in "..."). Each source may contain multiple certificates.
The certificate verification options -verify_hostname, -verify_ip,
and -verify_email have no effect on the certificate verification
enabled via this option.
-untrusted filenames|uris
Non-trusted intermediate CA certificate(s). Any extra certificates
given with the -cert option are appended to it. All these
certificates may be useful for cert path construction for the own
CMP signer certificate (to include in the extraCerts field of
request messages) and for the TLS client certificate (if TLS is
used) as well as for chain building when validating server
certificates (checking signature-based CMP message protection) and
when validating newly enrolled certificates.
Multiple sources may be given, separated by commas and/or
whitespace (where in the latter case the whole argument must be
enclosed in "..."). Each source may contain multiple certificates.
-srvcert filename|uri
The specific CMP server certificate to expect and directly trust
(even if it is expired) when verifying signature-based protection
of CMP response messages. This pins the accepted server and
results in ignoring the -trusted option.
If set, the subject of the certificate is also used as default
value for the recipient of CMP requests and as default value for
the expected sender of CMP responses.
-expect_sender name
Distinguished Name (DN) expected in the sender field of incoming
CMP messages. Defaults to the subject DN of the pinned -srvcert,
if any.
This can be used to make sure that only a particular entity is
accepted as CMP message signer, and attackers are not able to use
arbitrary certificates of a trusted PKI hierarchy to fraudulently
pose as a CMP server. Note that this option gives slightly more
freedom than setting the -srvcert, which pins the server to the
holder of a particular certificate, while the expected sender name
will continue to match after updates of the server cert.
The argument must be formatted as
/type0=value0/type1=value1/type2=.... For details see the
description of the -subject option.
-ignore_keyusage
Ignore key usage restrictions in CMP signer certificates when
validating signature-based protection of incoming CMP messages. By
default, "digitalSignature" must be allowed by CMP signer
certificates.
-unprotected_errors
Accept missing or invalid protection of negative responses from the
server. This applies to the following message types and contents:
o error messages
o negative certificate responses (IP/CP/KUP)
o negative revocation responses (RP)
o negative PKIConf messages
WARNING: This setting leads to unspecified behavior and it is meant
exclusively to allow interoperability with server implementations
violating RFC 4210, e.g.:
o section 5.1.3.1 allows exceptions from protecting only for
special cases: "There MAY be cases in which the PKIProtection
BIT STRING is deliberately not used to protect a message [...]
because other protection, external to PKIX, will be applied
instead."
o section 5.3.21 is clear on ErrMsgContent: "The CA MUST always
sign it with a signature key."
o appendix D.4 shows PKIConf message having protection
-srvcertout filename
The file where to save the successfully validated certificate, if
any, that the CMP server used for signature-based response message
protection. If there is no such certificate, typically because the
protection was MAC-based, this is indicated by deleting the file
(if it existed).
-extracertsout filename
The file where to save the list of certificates contained in the
extraCerts field of the last received response message that is not
a pollRep nor PKIConf.
-cacertsout filename
The file where to save the list of CA certificates contained in the
caPubs field if a positive certificate response (i.e., IP, CP, or
KUP) message was received or contained in a general response (genp)
message with infoType "caCerts".
-oldwithold filename
The root CA certificate to include in a genm request of infoType
"rootCaCert". If present and the optional oldWithNew certificate
is received, it is verified using the newWithNew certificate as the
(only) trust anchor.
-newwithnew filename
This option must be provided when -infotype rootCaCert is given.
It specifies the file to save the newWithNew certificate received
in a genp message of type "rootCaKeyUpdate". If on success no such
cert was received, this file (if present) is deleted to indicate
that the requested root CA certificate update is not available.
Any received newWithNew certificate is verified using any received
newWithOld certificate as untrusted intermediate certificate and
the certificate provided with -oldwithold as the (only) trust
anchor, or if not provided, using the certificates given with the
-trusted option.
WARNING: The newWithNew certificate is meant to be a certificate
that will be trusted. The trust placed in it cannot be stronger
than the trust placed in the -oldwithold certificate if present,
otherwise it cannot be stronger than the weakest trust placed in
any of the -trusted certificates.
-newwithold filename
The file to save any newWithOld certificate received in a genp
message of infoType "rootCaKeyUpdate". If on success no such cert
was received, this is indicated by deleting the file.
-oldwithnew filename
The file to save any oldWithNew certificate received in a genp
message of infoType "rootCaKeyUpdate". If on success no such cert
was received, this is indicated by deleting the file.
Client authentication options
-ref value
Reference number/string/value to use as fallback senderKID; this is
required if no sender name can be determined from the -cert or
<-subject> options and is typically used when authenticating with
pre-shared key (password-based MAC).
-secret arg
Provides the source of a secret value to use with MAC-based message
protection. This takes precedence over the -cert and -key options.
The secret is used for creating MAC-based protection of outgoing
messages and for validating incoming messages that have MAC-based
protection. The algorithm used by default is Password-Based
Message Authentication Code (PBM) as defined in RFC 4210 section
5.1.3.1.
For more information about the format of arg see
openssl-passphrase-options(1).
-cert filename|uri
The client's current CMP signer certificate. Requires the
corresponding key to be given with -key.
The subject and the public key contained in this certificate serve
as fallback values in the certificate template of IR/CR/KUR
messages.
The subject of this certificate will be used as sender of outgoing
CMP messages, while the subject of -oldcert or -subjectName may
provide fallback values.
The issuer of this certificate is used as one of the recipient
fallback values and as fallback issuer entry in the certificate
template of IR/CR/KUR messages.
When performing signature-based message protection, this
"protection certificate", also called "signer certificate", will be
included first in the extraCerts field of outgoing messages and the
signature is done with the corresponding key. In Initialization
Request (IR) messages this can be used for authenticating using an
external entity certificate as defined in appendix E.7 of RFC 4210.
For Key Update Request (KUR) messages this is also used as the
certificate to be updated if the -oldcert option is not given.
If the file includes further certs, they are appended to the
untrusted certs because they typically constitute the chain of the
client certificate, which is included in the extraCerts field in
signature-protected request messages.
-own_trusted filenames|uris
If this list of certificates is provided then the chain built for
the client-side CMP signer certificate given with the -cert option
is verified using the given certificates as trust anchors.
Multiple sources may be given, separated by commas and/or
whitespace (where in the latter case the whole argument must be
enclosed in "..."). Each source may contain multiple certificates.
The certificate verification options -verify_hostname, -verify_ip,
and -verify_email have no effect on the certificate verification
enabled via this option.
-key filename|uri
The corresponding private key file for the client's current
certificate given in the -cert option. This will be used for
signature-based message protection unless the -secret option
indicating MAC-based protection or -unprotected_requests is given.
It is also used as a fallback for the -newkey option with IR/CR/KUR
messages.
-keypass arg
Pass phrase source for the private key given with the -key option.
Also used for -cert and -oldcert in case it is an encrypted PKCS#12
file. If not given here, the password will be prompted for if
needed.
For more information about the format of arg see
openssl-passphrase-options(1).
-digest name
Specifies name of supported digest to use in RFC 4210's MSG_SIG_ALG
and as the one-way function (OWF) in "MSG_MAC_ALG". If applicable,
this is used for message protection and proof-of-possession (POPO)
signatures. To see the list of supported digests, use "openssl
list -digest-commands". Defaults to "sha256".
-mac name
Specifies the name of the MAC algorithm in "MSG_MAC_ALG". To get
the names of supported MAC algorithms use "openssl list
-mac-algorithms" and possibly combine such a name with the name of
a supported digest algorithm, e.g., hmacWithSHA256. Defaults to
"hmac-sha1" as per RFC 4210.
-extracerts filenames|uris
Certificates to append in the extraCerts field when sending
messages. They can be used as the default CMP signer certificate
chain to include.
Multiple sources may be given, separated by commas and/or
whitespace (where in the latter case the whole argument must be
enclosed in "..."). Each source may contain multiple certificates.
-unprotected_requests
Send request messages without CMP-level protection.
Credentials format options
-certform PEM|DER
File format to use when saving a certificate to a file. Default
value is PEM.
-keyform PEM|DER|P12|ENGINE
The format of the key input; unspecified by default. See "Format
Options" in openssl(1) for details.
-otherpass arg
Pass phrase source for certificate given with the -trusted,
-untrusted, -own_trusted, -srvcert, -out_trusted, -extracerts,
-srv_trusted, -srv_untrusted, -ref_cert, -rsp_cert,
-rsp_extracerts, -rsp_capubs, -rsp_newwithnew, -rsp_newwithold,
-rsp_oldwithnew, -tls_extra, and -tls_trusted options. If not
given here, the password will be prompted for if needed.
For more information about the format of arg see
openssl-passphrase-options(1).
-engine id
See "Engine Options" in openssl(1). This option is deprecated.
As an alternative to using this combination:
-engine {engineid} -key {keyid} -keyform ENGINE
... it's also possible to just give the key ID in URI form to -key,
like this:
-key org.openssl.engine:{engineid}:{keyid}
This applies to all options specifying keys: -key, -newkey, and
-tls_key.
Provider options
-provider name
-provider-path path
-propquery propq
See "Provider Options" in openssl(1), provider(7), and property(7).
Random state options
-rand files, -writerand file
See "Random State Options" in openssl(1) for details.
TLS connection options
-tls_used
Make the CMP client use TLS (regardless if other TLS-related
options are set) for message exchange with the server via HTTP.
This option is not supported with the -port option. It is implied
if the -server option is given with the scheme "https". It is
ignored if the -server option is not given or -use_mock_srv is
given or -rspin is given with enough filename arguments.
The following TLS-related options are ignored if TLS is not used.
-tls_cert filename|uri
Client's TLS certificate to use for authenticating to the TLS
server. If the source includes further certs they are used (along
with -untrusted certs) for constructing the client cert chain
provided to the TLS server.
-tls_key filename|uri
Private key for the client's TLS certificate.
-tls_keypass arg
Pass phrase source for client's private TLS key -tls_key. Also
used for -tls_cert in case it is an encrypted PKCS#12 file. If not
given here, the password will be prompted for if needed.
For more information about the format of arg see
openssl-passphrase-options(1).
-tls_extra filenames|uris
Extra certificates to provide to the TLS server during handshake.
-tls_trusted filenames|uris
Trusted certificate(s) to use for validating the TLS server
certificate. This implies hostname validation.
Multiple sources may be given, separated by commas and/or
whitespace (where in the latter case the whole argument must be
enclosed in "..."). Each source may contain multiple certificates.
The certificate verification options -verify_hostname, -verify_ip,
and -verify_email have no effect on the certificate verification
enabled via this option.
-tls_host name
Address to be checked during hostname validation. This may be a
DNS name or an IP address. If not given it defaults to the -server
address.
Client-side debugging options
-batch
Do not interactively prompt for input, for instance when a password
is needed. This can be useful for batch processing and testing.
-repeat number
Invoke the command the given positive number of times with the same
parameters. Default is one invocation.
-reqin filenames
Take the sequence of CMP requests to send to the server from the
given file(s) rather than from the sequence of requests produced
internally.
This option is ignored if the -rspin option is given because in the
latter case no requests are actually sent.
Multiple filenames may be given, separated by commas and/or
whitespace (where in the latter case the whole argument must be
enclosed in "...").
The files are read as far as needed to complete the transaction and
filenames have been provided. If more requests are needed, the
remaining ones are taken from the items at the respective position
in the sequence of requests produced internally.
The client needs to update the recipNonce field in the given
requests (except for the first one) in order to satisfy the checks
to be performed by the server. This causes re-protection (if
protecting requests is required).
-reqin_new_tid
Use a fresh transactionID for CMP request messages read using
-reqin, which causes their reprotection (if protecting requests is
required). This may be needed in case the sequence of requests is
reused and the CMP server complains that the transaction ID has
already been used.
-reqout filenames
Save the sequence of CMP requests created by the client to the
given file(s). These requests are not sent to the server if the
-reqin option is used, too.
Multiple filenames may be given, separated by commas and/or
whitespace.
Files are written as far as needed to save the transaction and
filenames have been provided. If the transaction contains more
requests, the remaining ones are not saved.
-rspin filenames
Process the sequence of CMP responses provided in the given
file(s), not contacting any given server, as long as enough
filenames are provided to complete the transaction.
Multiple filenames may be given, separated by commas and/or
whitespace.
Any server specified via the -server or -use_mock_srv options is
contacted only if more responses are needed to complete the
transaction. In this case the transaction will fail unless the
server has been prepared to continue the already started
transaction.
-rspout filenames
Save the sequence of actually used CMP responses to the given
file(s). These have been received from the server unless -rspin
takes effect.
Multiple filenames may be given, separated by commas and/or
whitespace.
Files are written as far as needed to save the responses contained
in the transaction and filenames have been provided. If the
transaction contains more responses, the remaining ones are not
saved.
-use_mock_srv
Test the client using the internal CMP server mock-up at API level,
bypassing socket-based transfer via HTTP. This excludes the
-server and -port options.
Mock server options
-port number
Act as HTTP-based CMP server mock-up listening on the given local
port. The client may address the server via, e.g., 127.0.0.1 or
"[::1]". This option excludes the -server and -use_mock_srv
options. The -rspin, -rspout, -reqin, and -reqout options so far
are not supported in this mode.
-max_msgs number
Maximum number of CMP (request) messages the CMP HTTP server mock-
up should handle, which must be nonnegative. The default value is
0, which means that no limit is imposed. In any case the server
terminates on internal errors, but not when it detects a CMP-level
error that it can successfully answer with an error message.
-srv_ref value
Reference value to use as senderKID of server in case no -srv_cert
is given.
-srv_secret arg
Password source for server authentication with a pre-shared key
(secret).
-srv_cert filename|uri
Certificate of the server.
-srv_key filename|uri
Private key used by the server for signing messages.
-srv_keypass arg
Server private key (and cert) file pass phrase source.
-srv_trusted filenames|uris
Trusted certificates for client authentication.
The certificate verification options -verify_hostname, -verify_ip,
and -verify_email have no effect on the certificate verification
enabled via this option.
-srv_untrusted filenames|uris
Intermediate CA certs that may be useful when validating client
certificates.
-ref_cert filename|uri
Certificate to be expected for RR messages and any oldCertID in KUR
messages.
-rsp_cert filename|uri
Certificate to be returned as mock enrollment result.
-rsp_extracerts filenames|uris
Extra certificates to be included in mock certification responses.
-rsp_capubs filenames|uris
CA certificates to be included in mock Initialization Response (IP)
message.
-rsp_newwithnew filename|uri
Certificate to be returned in newWithNew field of genp of type
rootCaKeyUpdate.
-rsp_newwithold filename|uri
Certificate to be returned in newWithOld field of genp of type
rootCaKeyUpdate.
-rsp_oldwithnew filename|uri
Certificate to be returned in oldWithNew field of genp of type
rootCaKeyUpdate.
-poll_count number
Number of times the client must poll before receiving a
certificate.
-check_after number
The checkAfter value (number of seconds to wait) to include in poll
response.
-grant_implicitconf
Grant implicit confirmation of newly enrolled certificate.
-pkistatus number
PKIStatus to be included in server response. Valid range is 0
(accepted) .. 6 (keyUpdateWarning).
-failure number
A single failure info bit number to be included in server response.
Valid range is 0 (badAlg) .. 26 (duplicateCertReq).
-failurebits number Number representing failure bits to be included in
server response. Valid range is 0 .. 2^27 - 1.
-statusstring arg
Text to be included as status string in server response.
-send_error
Force server to reply with error message.
-send_unprotected
Send response messages without CMP-level protection.
-send_unprot_err
In case of negative responses, server shall send unprotected error
messages, certificate responses (IP/CP/KUP), and revocation
responses (RP). WARNING: This setting leads to behavior violating
RFC 4210.
-accept_unprotected
Accept missing or invalid protection of requests.
-accept_unprot_err
Accept unprotected error messages from client. So far this has no
effect because the server does not accept any error messages.
-accept_raverified
Accept RAVERIFED as proof of possession (POPO).
Certificate verification options, for both CMP and TLS
-allow_proxy_certs, -attime, -no_check_time, -check_ss_sig, -crl_check,
-crl_check_all, -explicit_policy, -extended_crl, -ignore_critical,
-inhibit_any, -inhibit_map, -no_alt_chains, -partial_chain, -policy,
-policy_check, -policy_print, -purpose, -suiteB_128, -suiteB_128_only,
-suiteB_192, -trusted_first, -use_deltas, -auth_level, -verify_depth,
-verify_email, -verify_hostname, -verify_ip, -verify_name, -x509_strict
-issuer_checks
Set various options of certificate chain verification. See
"Verification Options" in openssl-verification-options(1) for
details.
The certificate verification options -verify_hostname, -verify_ip,
and -verify_email only affect the certificate verification enabled
via the -out_trusted option.
NOTES
When a client obtains, from a CMP server, CA certificates that it is
going to trust, for instance via the "caPubs" field of a certificate
response or using general messages with infoType "caCerts" or
"rootCaCert", authentication of the CMP server is particularly
critical. So special care must be taken setting up server
authentication using -trusted and related options for certificate-based
authentication or -secret for MAC-based protection. If authentication
is certificate-based, the -srvcertout option should be used to obtain
the validated server certificate and perform an authorization check
based on it.
When setting up CMP configurations and experimenting with enrollment
options typically various errors occur until the configuration is
correct and complete. When the CMP server reports an error the client
will by default check the protection of the CMP response message. Yet
some CMP services tend not to protect negative responses. In this case
the client will reject them, and thus their contents are not shown
although they usually contain hints that would be helpful for
diagnostics. For assisting in such cases the CMP client offers a
workaround via the -unprotected_errors option, which allows accepting
such negative messages.
If OpenSSL was built with trace support enabled (e.g., "./config
enable-trace") and the environment variable OPENSSL_TRACE includes
HTTP, the requests and the response headers transferred via HTTP are
printed.
EXAMPLES
Simple examples using the default OpenSSL configuration file
This CMP client implementation comes with demonstrative CMP sections in
the example configuration file openssl/apps/openssl.cnf, which can be
used to interact conveniently with the Insta Demo CA.
In order to enroll an initial certificate from that CA it is sufficient
to issue the following shell commands.
export OPENSSL_CONF=/path/to/openssl/apps/openssl.cnf
openssl genrsa -out insta.priv.pem
openssl cmp -section insta
This should produce the file insta.cert.pem containing a new
certificate for the private key held in insta.priv.pem. It can be
viewed using, e.g.,
openssl x509 -noout -text -in insta.cert.pem
In case the network setup requires using an HTTP proxy it may be given
as usual via the environment variable http_proxy or via the -proxy
option in the configuration file or the CMP command-line argument
-proxy, for example
-proxy http://192.168.1.1:8080
In the Insta Demo CA scenario both clients and the server may use the
pre-shared secret insta and the reference value 3078 to authenticate to
each other.
Alternatively, CMP messages may be protected in signature-based manner,
where the trust anchor in this case is insta.ca.crt and the client may
use any certificate already obtained from that CA, as specified in the
[signature] section of the example configuration. This can be used in
combination with the [insta] section simply by
openssl cmp -section insta,signature
By default the CMP IR message type is used, yet CR works equally here.
This may be specified directly at the command line:
openssl cmp -section insta -cmd cr
or by referencing in addition the [cr] section of the example
configuration:
openssl cmp -section insta,cr
In order to update the enrolled certificate one may call
openssl cmp -section insta,kur
using with MAC-based protection with PBM or
openssl cmp -section insta,kur,signature
using signature-based protection.
In a similar way any previously enrolled certificate may be revoked by
openssl cmp -section insta,rr -trusted insta.ca.crt
or
openssl cmp -section insta,rr,signature
Many more options can be given in the configuration file and/or on the
command line. For instance, the -reqexts CLI option may refer to a
section in the configuration file defining X.509 extensions to use in
certificate requests, such as "v3_req" in openssl/apps/openssl.cnf:
openssl cmp -section insta,cr -reqexts v3_req
Certificate enrollment
The following examples do not make use of a configuration file at
first. They assume that a CMP server can be contacted on the local TCP
port 80 and accepts requests under the alias /pkix/.
For enrolling its very first certificate the client generates a client
key and sends an initial request message to the local CMP server using
a pre-shared secret key for mutual authentication. In this example the
client does not have the CA certificate yet, so we specify the name of
the CA with the -recipient option and save any CA certificates that we
may receive in the "capubs.pem" file.
In below command line usage examples the "\" at line ends is used just
for formatting; each of the command invocations should be on a single
line.
openssl genrsa -out cl_key.pem
openssl cmp -cmd ir -server 127.0.0.1:80/pkix/ -recipient "/CN=CMPserver" \
-ref 1234 -secret pass:1234-5678 \
-newkey cl_key.pem -subject "/CN=MyName" \
-cacertsout capubs.pem -certout cl_cert.pem
Certificate update
Then, when the client certificate and its related key pair needs to be
updated, the client can send a key update request taking the certs in
"capubs.pem" as trusted for authenticating the server and using the
previous cert and key for its own authentication. Then it can start
using the new cert and key.
openssl genrsa -out cl_key_new.pem
openssl cmp -cmd kur -server 127.0.0.1:80/pkix/ \
-trusted capubs.pem \
-cert cl_cert.pem -key cl_key.pem \
-newkey cl_key_new.pem -certout cl_cert.pem
cp cl_key_new.pem cl_key.pem
This command sequence can be repeated as often as needed.
Requesting information from CMP server
Requesting "all relevant information" with an empty General Message.
This prints information about all received ITAV infoTypes to stdout.
openssl cmp -cmd genm -server 127.0.0.1/pkix/ -recipient "/CN=CMPserver" \
-ref 1234 -secret pass:1234-5678
Using a custom configuration file
For CMP client invocations, in particular for certificate enrollment,
usually many parameters need to be set, which is tedious and error-
prone to do on the command line. Therefore, the client offers the
possibility to read options from sections of the OpenSSL config file,
usually called openssl.cnf. The values found there can still be
extended and even overridden by any subsequently loaded sections and on
the command line.
After including in the configuration file the following sections:
[cmp]
server = 127.0.0.1
path = pkix/
trusted = capubs.pem
cert = cl_cert.pem
key = cl_key.pem
newkey = cl_key.pem
certout = cl_cert.pem
[init]
recipient = "/CN=CMPserver"
trusted =
cert =
key =
ref = 1234
secret = pass:1234-5678-1234-567
subject = "/CN=MyName"
cacertsout = capubs.pem
the above enrollment transactions reduce to
openssl cmp -section cmp,init
openssl cmp -cmd kur -newkey cl_key_new.pem
and the above transaction using a general message reduces to
openssl cmp -section cmp,init -cmd genm
SEE ALSO
openssl-genrsa(1), openssl-ecparam(1), openssl-list(1), openssl-req(1),
openssl-x509(1), x509v3_config(5)
HISTORY
The cmp application was added in OpenSSL 3.0.
The -engine option was deprecated in OpenSSL 3.0.
COPYRIGHT
Copyright 2007-2023 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file LICENSE in the source distribution or at
<https://www.openssl.org/source/license.html>.
3.2.2 2025-01-29 OPENSSL-CMP(1ossl)