%====================================================================%
%                  MORIOND.TEX     2-Feb-1995                        %
% This latex file rewritten from various sources for use in the      %
% preparation of the standard proceedings Volume, latest version     %
% for the Neutrino'96 Helsinki conference proceedings                %
% by Susan Hezlet with acknowledgments to Lukas Nellen.              %
% Some changes are due to David Cassel.                              %
%                                                                    %
% Updated to LaTeX2e and adapted to Moriond 2001 conditions          %
%                     by F.Montanet 24/04/2001                       %
%====================================================================%

\documentclass[11pt]{article}
\usepackage{moriond,epsfig}
%\documentstyle[11pt,moriond,epsfig]{article}


\bibliographystyle{unsrt}
% for BibTeX - sorted numerical labels by order of
% first citation.

% A useful Journal macro
\def\Journal#1#2#3#4{{#1} {\bf #2}, #3 (#4)}

% Some useful journal names
\def\NCA{\em Nuovo Cimento}
\def\NIM{\em Nucl. Instrum. Methods}
\def\NIMA{{\em Nucl. Instrum. Methods} A}
\def\NPB{{\em Nucl. Phys.} B}
\def\PLB{{\em Phys. Lett.}  B}
\def\PRL{\em Phys. Rev. Lett.}
\def\PRD{{\em Phys. Rev.} D}
\def\ZPC{{\em Z. Phys.} C}

% Some other macros used in the sample text
\def\st{\scriptstyle}
\def\sst{\scriptscriptstyle}
\def\mco{\multicolumn}
\def\epp{\epsilon^{\prime}}
\def\vep{\varepsilon}
\def\ra{\rightarrow}
\def\ppg{\pi^+\pi^-\gamma}
\def\vp{{\bf p}}
\def\ko{K^0}
\def\kb{\bar{K^0}}
\def\al{\alpha}
\def\ab{\bar{\alpha}}
\def\be{\begin{equation}}
\def\ee{\end{equation}}
\def\bea{\begin{eqnarray}}
\def\eea{\end{eqnarray}}
\def\CPbar{\hbox{{\rm CP}\hskip-1.80em{/}}}
%temp replacement due to no font
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%                                                %
%    BEGINNING OF TEXT                           %
%                                                %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\begin{document}
\vspace*{4cm}
\title{INSTRUCTIONS FOR PRODUCING A CAMERA-READY MANUSCRIPT}

\author{ A.B. AUTHOR }

\address{Department of Physics, Theoretical Physics, 1 Keble Road,\\
Oxford OX1 3NP, England}

\maketitle\abstracts{ This is where the abstract should be placed.
It should consist of one paragraph and give a concise summary of the
material in the article below. Replace the title, authors, and
addresses within the curly brackets with your own title, authors,
and addresses; please use capital letters for the title and the
authors. You may have as many authors and addresses as you wish.
It's preferable not to use footnotes in the abstract or the title;
the acknowledgments for funding bodies etc. are placed in a separate
section at the end of the text.}

\section{Guidelines}
\subsection{Producing the Hard Copy}\label{subsec:prod}

The hard copy may be printed using the procedure given below. You
should use two files: \footnote{You can get these files from our WWW
pages at {\sf
http://moriond.in2p3.fr/EW/2006/Proceedings/index.html}.}

\noindent {\em moriond.sty} --- the style file that provides the
higher level latex commands for the proceedings. Don't change these
parameters.

\noindent {\em moriond.tex} --- the main text. You can delete our
sample text and replace it with your own contribution to the volume,
however we recommend keeping an initial version of the file for
reference. Strip off any mail headers and then latex the tex file.
The command for latexing is {\sf latex moriond}, do this twice to
sort out the cross-referencing.

These files will work with standard latex 2.09 and latex2e. If there
is an abbreviation defined in the new definitions at the top of the
file {\em moriond.tex} that conflicts with one of your own macros,
then delete the appropriate command and revert to longhand. Failing
that, please consult your local texpert to check for other
conflicting macros that may be unique to your computer system. {\bf
Page numbers should not appear.}

\subsection{Headings and Text and Equations}

Please preserve the style of the headings, text fonts and line
spacing to provide a uniform style for the proceedings volume.

Equations should be centered and numbered consecutively, as in
Eq.~\ref{eq:murnf}, and the {\em eqnarray} environment may be used
to split equations into several lines, for example in
Eq.~\ref{eq:sp}, or to align several equations. An alternative
method is given in Eq.~\ref{eq:spa} for long sets of equations where
only one referencing equation number is wanted.

In latex, it is simplest to give the equation a label, as in
Eq.~\ref{eq:murnf} where we have used {\em
$\backslash$label\{eq:murnf\}} to identify the equation. You can
then use the reference {\em $\backslash$ref\{eq:murnf\}} when citing
the equation in the text which will avoid the need to manually
renumber equations due to later changes. (Look at the source file
for some examples of this.)

The same method can be used for referring to sections and
subsections.

\subsection{Tables}

The tables are designed to have a uniform style throughout the
proceedings volume. It doesn't matter how you choose to place the
inner lines of the table, but we would prefer the border lines to be
of the style shown in Table~\ref{tab:exp}.
 The top and bottom horizontal
lines should be single (using {\em $\backslash$hline}), and there
should be single vertical lines on the perimeter, (using {\em
$\backslash$begin\{tabular\}\{$|...|$\}}).
 For the inner lines of the table, it looks better if they are
kept to a minimum. We've chosen a more complicated example purely as
an illustration of what is possible.

The caption heading for a table should be placed at the top of the
table.

\begin{table}[t]
\caption{Experimental Data bearing on $\Gamma(K \ra \pi \pi \gamma)$
for the $\ko_S, \ko_L$ and $K^-$ mesons.\label{tab:exp}}
\vspace{0.4cm}
\begin{center}
\begin{tabular}{|c|c|c|l|}
\hline
& & & \\
& $\Gamma(\pi^- \pi^0)\; s^{-1}$ & $\Gamma(\pi^- \pi^0 \gamma)\;
s^{-1}$ &
\\ \hline
\mco{2}{|c|}{Process for Decay} & & \\
\cline{1-2} $K^-$ & $1.711 \times 10^7$ &
\begin{minipage}{1in}
$2.22 \times 10^4$ \\ (DE $ 1.46 \times 10^3)$
\end{minipage} &
\begin{minipage}{1.5in}
No (IB)-E1 interference seen but data shows excess events relative
to IB over $E^{\ast}_{\gamma} = 80$ to $100MeV$
\end{minipage} \\
& & &  \\ \hline
\end{tabular}
\end{center}
\end{table}


\subsection{Figures}\label{subsec:fig}

If you wish to `embed' a postscript figure in the file, then remove
the \% mark from the declaration of the postscript figure within the
figure description and change the filename to an appropriate one.
Also remove the comment mark from the {\em input epsfig} command at
the top of the file. You may need to play around with this as
different computer systems appear to use different commands.

Next adjust the scaling of the figure until it's correctly
positioned, and remove the declarations of the lines and any
anomalous spacing.

If you prefer to use some other method then it's very important to
leave the correct amount of vertical space in the figure declaration
to accomodate your figure (remove the lines and change the vspace in
the example.) Send the hard copy figures on separate pages with
clear instructions to match them to the correct space in the final
hard copy text. Please ensure the final hard copy figure is
correctly scaled to fit the space available (this ensures the figure
is legible.)

The caption heading for a figure should be placed below the figure.

\subsection{Limitations on the Placement of Tables,
Equations and Figures}\label{sec:plac}

Very large figures and tables should be placed on a page by
themselves. One can use the instruction {\em
$\backslash$begin\{figure\}$[$p$]$} or {\em
$\backslash$begin\{table\}$[$p$]$} to position these, and they will
appear on a separate page devoted to figures and tables. We would
recommend making any necessary adjustments to the layout of the
figures and tables only in the final draft. It is also simplest to
sort out line and page breaks in the last stages.

\subsection{Acknowledgments, Appendices, Footnotes and the Bibliography}
If you wish to have acknowledgments to funding bodies etc., these
may be placed in a separate section at the end of the text, before
the Appendices. This should not be numbered so use {\em
$\backslash$section$\ast$\{Acknowledgments\}}.

It's preferable to have no appendices in a brief article, but if
more than one is necessary then simply copy the {\em
$\backslash$section$\ast$\{Appendix\}} heading and type in Appendix
A, Appendix B etc. between the brackets.

Footnotes are denoted by a letter superscript in the
text,\footnote{Just like this one.} and references are denoted by a
number superscript. We have used {\em $\backslash$bibitem} to
produce the bibliography. Citations in the text use the labels
defined in the bibitem declaration, for example, the first paper by
Jarlskog~\cite{ja} is cited using the command {\em
$\backslash$cite\{ja\}}.

If you more commonly use the method of square brackets in the line
of text for citation than the superscript method, please note that
you need  to adjust the punctuation so that the citation command
appears after the punctuation mark.

\subsection{Final Manuscript}

The final hard copy that you send must be absolutely clean and
unfolded. It will be printed directly without any further editing.
Use a printer that has a good resolution (300 dots per inch or
higher). There should not be any corrections made on the printed
pages, nor should adhesive tape cover any lettering. Photocopies are
not acceptable.

The manuscript will not be reduced or enlarged when filmed so please
ensure that indices and other small pieces of text are legible.

A paper version should be sent by the {\bf 15th of May 2006} to:\\
{\bf
Patricia Chemali\\
LAL, Bat. 200 \\
Universite Paris-Sud  \\
91898 Orsay Cedex \\
France
}\\

The following may be (and has been) described as `dangerously
irrelevant' physics. The Lorentz-invariant phase space integral for
a general n-body decay from a particle with momentum $P$ and mass
$M$ is given by:
\begin{equation}
I((P - k_i)^2, m^2_i, M) = \frac{1}{(2 \pi)^5}\! \int\!\frac{d^3
k_i}{2 \omega_i} \! \delta^4(P - k_i). \label{eq:murnf}
\end{equation}
The only experiment on $K^{\pm} \ra \pi^{\pm} \pi^0 \gamma$ since
1976 is that of Bolotov {\it et al}.~\cite{bu}
        There are two
necessary conditions required for any acceptable parametrization of
the quark mixing matrix. The first is that the matrix must be
unitary, and the second is that it should contain a CP violating
phase $\delta$.
 In Sec.~\ref{subsec:fig} the connection between invariants (of
form similar to J) and unitarity relations will be examined further
for the more general $ n \times n $ case. The reason is that such a
matrix is not a faithful representation of the group, i.e. it does
not cover all of the parameter space available.
\begin{equation}
\begin{array}{rcl}
\bf{K} & = &  Im[V_{j, \alpha} {V_{j,\alpha + 1}}^*
{V_{j + 1,\alpha }}^* V_{j + 1, \alpha + 1} ] \\
       &   & + Im[V_{k, \alpha + 2} {V_{k,\alpha + 3}}^*
{V_{k + 1,\alpha + 2 }}^* V_{k + 1, \alpha + 3} ]  \\
       &   & + Im[V_{j + 2, \beta} {V_{j + 2,\beta + 1}}^*
{V_{j + 3,\beta }}^* V_{j + 3, \beta + 1} ]  \\
       &   & + Im[V_{k + 2, \beta + 2} {V_{k + 2,\beta + 3}}^*
{V_{k + 3,\beta + 2 }}^* V_{k + 3, \beta + 3}] \\
& & \\
\bf{M} & = &  Im[{V_{j, \alpha}}^* V_{j,\alpha + 1}
V_{j + 1,\alpha } {V_{j + 1, \alpha + 1}}^* ]  \\
       &   & + Im[V_{k, \alpha + 2} {V_{k,\alpha + 3}}^*
{V_{k + 1,\alpha + 2 }}^* V_{k + 1, \alpha + 3} ]  \\
       &   & + Im[{V_{j + 2, \beta}}^* V_{j + 2,\beta + 1}
V_{j + 3,\beta } {V_{j + 3, \beta + 1}}^* ]  \\
       &   & + Im[V_{k + 2, \beta + 2} {V_{k + 2,\beta + 3}}^*
{V_{k + 3,\beta + 2 }}^* V_{k + 3, \beta + 3}],
\\ & &
\end{array}\label{eq:spa}
\end{equation}
where $ k = j$ or $j+1$ and $\beta = \alpha$ or $\alpha+1$, but if
$k = j + 1$, then $\beta \neq \alpha + 1$ and similarly, if $\beta =
\alpha + 1$ then $ k \neq j + 1$.\footnote{An example of a matrix
which has elements containing the phase variable $e^{i \delta}$ to
second order, i.e. elements with a phase variable $e^{2i \delta}$ is
given at the end of this section.}
   There are only 162 quark mixing matrices using these parameters
which are to first order in the phase variable $e^{i \delta}$ as is
the case for the Jarlskog parametrizations, and for which J is not
identically zero. It should be noted that these are physically
identical and form just one true parametrization. \bea
T & = & Im[V_{11} {V_{12}}^* {V_{21}}^* V_{22}]  \nonumber \\
&  & + Im[V_{12} {V_{13}}^* {V_{22}}^* V_{23}]   \nonumber \\
&  & - Im[V_{33} {V_{31}}^* {V_{13}}^* V_{11}]. \label{eq:sp} \eea


\begin{figure}
\rule{5cm}{0.2mm}\hfill\rule{5cm}{0.2mm} \vskip 2.5cm
\rule{5cm}{0.2mm}\hfill\rule{5cm}{0.2mm}
%\psfig{figure=filename.ps,height=1.5in}
\caption{Radiative (off-shell, off-page and out-to-lunch) SUSY
Higglets. \label{fig:radish}}
\end{figure}

\section*{Acknowledgments}
This is where one places acknowledgments for funding bodies etc.
Note that there are no section numbers for the Acknowledgments,
Appendix or References.

\section*{Appendix}
 We can insert an appendix here and place equations so that they are
given numbers such as Eq.~\ref{eq:app}. \be x = y. \label{eq:app}
\ee
\section*{References}
\begin{thebibliography}{99}
\bibitem{ja}C Jarlskog in {\em CP Violation}, ed. C Jarlskog
(World Scientific, Singapore, 1988).

\bibitem{ma}L. Maiani, \Journal{\PLB}{62}{183}{1976}.

\bibitem{bu}J.D. Bjorken and I. Dunietz, \Journal{\PRD}{36}{2109}{1987}.

\bibitem{bd}C.D. Buchanan {\it et al}, \Journal{\PRD}{45}{4088}{1992}.

\end{thebibliography}

\end{document}

%%%%%%%%%%%%%%%%%%%%%%
% End of moriond.tex  %
%%%%%%%%%%%%%%%%%%%%%%
