man 1 BOND2TEAM

BOND2TEAM(1)            Bonding to Team conversion tool           BOND2TEAM(1)

NAME
       bond2team -- Converts bonding configuration to team

SYNOPSIS
       bond2team [options]

DESCRIPTION
       bond2team  is  a tool to convert bonding options to team trying as much
       as possible to keep the original functionality.

       The resulting files are saved in  a  temporary  directory  using  ifcfg
       style  by  default.  In the case of converting an ifcfg file, it trans-
       lates the bonding options to team, preserving  all  other  options.  In
       that  case,  it converts the respective slave ifcfg files to team port,
       preserving all their other options too.  In  case  of  converting  from
       given  bonding options in the command line, the tool can use the speci-
       fied ports as team ports.

OPTIONS
       --master <interface> 
              Specify the interface name or ifcfg file to convert. If the  in-
              terface   name   is   specified,   the   tool   will   look   at
              /etc/sysconfig/network-scripts/ for the respective ifcfg file.

       --rename <interface> 
              This is a convenient option to replace  the  original  interface
              name  by the specified name. For instance, if --master specifies
              bond0, it is possible to use --rename team0 to change the  final
              interface name to team0.

       --ifcfg
              Set the output format to ifcfg config style. [default]

       --json Set  the output format to JSON style. See teamd.conf(5) for fur-
              ther details.

       --bonding_opts '<bonding options>'
              Specify the bonding options to be converted instead  of  reading
              them from the ifcfg file.

       --port <interface> 
              Set the specified interface as a team port.

       --configdir <directory> 
              Change      the      ifcfg      configuration      path     from
              /etc/sysconfig/network-scripts to the specified <directory>.

       --outputdir <directory> 
              Set the output directory to <directory>.

       --stdout
              Print the result to the screen instead of writing to files.

       --debug
              Increase the debugging level.

       --quiet
              Disallow any messages to be printed to console.

       --version
              Print tool version to console and exit.

       --help Print help text to console and exit.

       --examples
              Print common usage examples to console and exit.

EXAMPLES
       To convert the current 'bond0' ifcfg configuration to team ifcfg:

       # bond2team --master bond0

       To convert the current 'bond0' ifcfg configuration to team ifcfg renam-
       ing the interface name to 'team0'.  Caution : firewall rules, alias in-
       terfaces, etc., that might be tied to the original interface  name  can
       break  after  the  renaming because the tool will only change the ifcfg
       file, nothing else.

       # bond2team --master bond0 --rename team0

       To convert given bonding parameters with ports without any ifcfg:

       # bond2team --bonding_opts 'mode=1 miimon=500 primary=eth1 primary_reselect=0' --port eth1 --port eth2 --port eth3 --port eth4

       For more examples, see the option --examples.

CAVEATS
       The tool will not convert any other configuration which might  be  tied
       to  the  current setup. For instance, firewall rules, alias interfaces,
       bridges, and so on.

AUTHOR
       Flavio Leitner is the original author of the tool.  Jiri Pirko  is  the
       original author and current maintainer of libteam.

SEE ALSO
       teamd(8), teamdctl(8), teamd.conf(5), teamnl(8)

libteam                           2013-07-18                      BOND2TEAM(1)