man
7ossl OSSL-GUIDE-QUIC-MULTI-STREAM
OSSL-GUIDE-QUIC-MULTI-STREAM(7ossl) OpenSSLOSSL-GUIDE-QUIC-MULTI-STREAM(7ossl)
NAME
ossl-guide-quic-multi-stream - OpenSSL Guide: Writing a simple
multi-stream QUIC client
INTRODUCTION
This page will introduce some important concepts required to write a
simple QUIC multi-stream application. It assumes a basic understanding
of QUIC and how it is used in OpenSSL. See
ossl-guide-quic-introduction(7) and ossl-guide-quic-client-block(7).
QUIC STREAMS
In a QUIC multi-stream application we separate out the concepts of a
QUIC "connection" and a QUIC "stream". A connection object represents
the overarching details of the connection between a client and a server
including all its negotiated and configured parameters. We use the SSL
object for that in an OpenSSL application (known as the connection SSL
object). It is created by an application calling SSL_new(3).
Separately a connection can have zero or more streams associated with
it (although a connection with zero streams is probably not very
useful, so normally you would have at least one). A stream is used to
send and receive data between the two peers. Each stream is also
represented by an SSL object. A stream is logically independent of all
the other streams associated with the same connection. Data sent on a
stream is guaranteed to be delivered in the order that it was sent
within that stream. The same is not true across streams, e.g. if an
application sends data on stream 1 first and then sends some more data
on stream 2 second, then the remote peer may receive the data sent on
stream 2 before it receives the data sent on stream 1.
Once the connection SSL object has completed its handshake (i.e.
SSL_connect(3) has returned 1), stream SSL objects are created by the
application calling SSL_new_stream(3) or SSL_accept_stream(3) (see
"CREATING NEW STREAMS" below).
The same threading rules apply to SSL objects as for most OpenSSL
objects (see ossl-guide-libraries-introduction(7)). In particular most
OpenSSL functions are thread safe, but the SSL object is not. This
means that you can use an SSL object representing one stream at the
same time as another thread is using a different SSL object for a
different stream on the same connection. But you cannot use the same
SSL object on two different threads at the same time (without
additional application level locking).
THE DEFAULT STREAM
A connection SSL object may also (optionally) be associated with a
stream. This stream is known as the default stream. The default stream
is automatically created and associated with the SSL object when the
application calls SSL_read_ex(3), SSL_read(3), SSL_write_ex(3) or
SSL_write(3) and passes the connection SSL object as a parameter.
If a client application calls SSL_write_ex(3) or SSL_write(3) first
then (by default) the default stream will be a client-initiated bi-
directional stream. If a client application calls SSL_read_ex(3) or
SSL_read(3) first then the first stream initiated by the server will be
used as the default stream (whether it is bi-directional or uni-
directional).
This behaviour can be controlled via the default stream mode. See
SSL_set_default_stream_mode(3) for further details.
It is recommended that new multi-stream applications should not use a
default stream at all and instead should use a separate stream SSL
object for each stream that is used. This requires calling
SSL_set_default_stream_mode(3) and setting the mode to
SSL_DEFAULT_STREAM_MODE_NONE.
CREATING NEW STREAMS
An endpoint can create a new stream by calling SSL_new_stream(3). This
creates a locally initiated stream. In order to do so you must pass the
QUIC connection SSL object as a parameter. You can also specify whether
you want a bi-directional or a uni-directional stream.
The function returns a new QUIC stream SSL object for sending and
receiving data on that stream.
The peer may also initiate streams. An application can use the function
SSL_get_accept_stream_queue_len(3) to determine the number of streams
that the peer has initiated that are waiting for the application to
handle. An application can call SSL_accept_stream(3) to create a new
SSL object for a remotely initiated stream. If the peer has not
initiated any then this call will block until one is available if the
connection object is in blocking mode (see SSL_set_blocking_mode(3)).
When using a default stream OpenSSL will prevent new streams from being
accepted. To override this behaviour you must call
SSL_set_incoming_stream_policy(3) to set the policy to
SSL_INCOMING_STREAM_POLICY_ACCEPT. See the man page for further
details. This is not relevant if the default stream has been disabled
as described in "THE DEFAULT STREAM" above.
Any stream may be bi-directional or uni-directional. If it is uni-
directional then the initiator can write to it but not read from it,
and vice-versa for the peer. You can determine what type of stream an
SSL object represents by calling SSL_get_stream_type(3). See the man
page for further details.
USING A STREAM TO SEND AND RECEIVE DATA
Once you have a stream SSL object (which includes the connection SSL
object if a default stream is in use) then you can send and receive
data over it using the SSL_write_ex(3), SSL_write(3), SSL_read_ex(3) or
SSL_read(3) functions. See the man pages for further details.
In the event of one of these functions not returning a success code
then you should call SSL_get_error(3) to find out further details about
the error. In blocking mode this will either be a fatal error (e.g.
SSL_ERROR_SYSCALL or SSL_ERROR_SSL), or it will be
SSL_ERROR_ZERO_RETURN which can occur when attempting to read data from
a stream and the peer has indicated that the stream is concluded (i.e.
"FIN" has been signalled on the stream). This means that the peer will
send no more data on that stream. Note that the interpretation of
SSL_ERROR_ZERO_RETURN is slightly different for a QUIC application
compared to a TLS application. In TLS it occurs when the connection has
been shutdown by the peer. In QUIC this only tells you that the current
stream has been concluded by the peer. It tells you nothing about the
underlying connection. If the peer has concluded the stream then no
more data will be received on it, however an application can still send
data to the peer until the send side of the stream has also been
concluded. This can happen by the application calling
SSL_stream_conclude(3). It is an error to attempt to send more data on
a stream after SSL_stream_conclude(3) has been called.
It is also possible to abandon a stream abnormally by calling
SSL_stream_reset(3).
Once a stream object is no longer needed it should be freed via a call
to SSL_free(3). An application should not call SSL_shutdown(3) on it
since this is only meaningful for connection level SSL objects. Freeing
the stream will automatically signal STOP_SENDING to the peer.
STREAMS AND CONNECTIONS
Given a stream object it is possible to get the SSL object
corresponding to the connection via a call to SSL_get0_connection(3).
Multi-threaded restrictions apply so care should be taken when using
the returned connection object. Specifically, if you are handling each
of your stream objects in a different thread and call
SSL_get0_connection(3) from within that thread then you must be careful
to not to call any function that uses the connection object at the same
time as one of the other threads is also using that connection object
(with the exception of SSL_accept_stream(3) and
SSL_get_accept_stream_queue_len(3) which are thread-safe).
A stream object does not inherit all its settings and values from its
parent SSL connection object. Therefore certain function calls that are
relevant to the connection as a whole will not work on a stream. For
example the function SSL_get_certificate(3) can be used to obtain a
handle on the peer certificate when called with a connection SSL
object. When called with a stream SSL object it will return NULL.
SIMPLE MULTI-STREAM QUIC CLIENT EXAMPLE
This section will present various source code samples demonstrating how
to write a simple multi-stream QUIC client application which connects
to a server, send some HTTP/1.0 requests to it, and read back the
responses. Note that HTTP/1.0 over QUIC is non-standard and will not be
supported by real world servers. This is for demonstration purposes
only.
We will build on the example code for the simple blocking QUIC client
that is covered on the ossl-guide-quic-client-block(7) page and we
assume that you are familiar with it. We will only describe the
differences between the simple blocking QUIC client and the multi-
stream QUIC client. Although the example code uses blocking SSL
objects, you can equally use nonblocking SSL objects. See
ossl-guide-quic-client-non-block(7) for more information about writing
a nonblocking QUIC client.
The complete source code for this example multi-stream QUIC client is
available in the "demos/guide" directory of the OpenSSL source
distribution in the file "quic-multi-stream.c". It is also available
online at
<https://github.com/openssl/openssl/blob/master/demos/guide/quic-multi-stream.c>.
Disabling the default stream
As discussed above in "THE DEFAULT STREAM" we will follow the
recommendation to disable the default stream for our multi-stream
client. To do this we call the SSL_set_default_stream_mode(3) function
and pass in our connection SSL object and the value
SSL_DEFAULT_STREAM_MODE_NONE.
/*
* We will use multiple streams so we will disable the default stream mode.
* This is not a requirement for using multiple streams but is recommended.
*/
if (!SSL_set_default_stream_mode(ssl, SSL_DEFAULT_STREAM_MODE_NONE)) {
printf("Failed to disable the default stream mode\n");
goto end;
}
Creating the request streams
For the purposes of this example we will create two different streams
to send two different HTTP requests to the server. For the purposes of
demonstration the first of these will be a bi-directional stream and
the second one will be a uni-directional one:
/*
* We create two new client initiated streams. The first will be
* bi-directional, and the second will be uni-directional.
*/
stream1 = SSL_new_stream(ssl, 0);
stream2 = SSL_new_stream(ssl, SSL_STREAM_FLAG_UNI);
if (stream1 == NULL || stream2 == NULL) {
printf("Failed to create streams\n");
goto end;
}
Writing data to the streams
Once the streams are successfully created we can start writing data to
them. In this example we will be sending a different HTTP request on
each stream. To avoid repeating too much code we write a simple helper
function to send an HTTP request to a stream:
int write_a_request(SSL *stream, const char *request_start,
const char *hostname)
{
const char *request_end = "\r\n\r\n";
size_t written;
if (!SSL_write_ex(stream, request_start, strlen(request_start), &written))
return 0;
if (!SSL_write_ex(stream, hostname, strlen(hostname), &written))
return 0;
if (!SSL_write_ex(stream, request_end, strlen(request_end), &written))
return 0;
return 1;
}
We assume the strings request1_start and request2_start hold the
appropriate HTTP requests. We can then call our helper function above
to send the requests on the two streams. For the sake of simplicity
this example does this sequentially, writing to stream1 first and, when
this is successful, writing to stream2 second. Remember that our client
is blocking so these calls will only return once they have been
successfully completed. A real application would not need to do these
writes sequentially or in any particular order. For example we could
start two threads (one for each stream) and write the requests to each
stream simultaneously.
/* Write an HTTP GET request on each of our streams to the peer */
if (!write_a_request(stream1, request1_start, hostname)) {
printf("Failed to write HTTP request on stream 1\n");
goto end;
}
if (!write_a_request(stream2, request2_start, hostname)) {
printf("Failed to write HTTP request on stream 2\n");
goto end;
}
Reading data from a stream
In this example stream1 is a bi-directional stream so, once we have
sent the request on it, we can attempt to read the response from the
server back. Here we just repeatedly call SSL_read_ex(3) until that
function fails (indicating either that there has been a problem, or
that the peer has signalled the stream as concluded).
printf("Stream 1 data:\n");
/*
* Get up to sizeof(buf) bytes of the response from stream 1 (which is a
* bidirectional stream). We keep reading until the server closes the
* connection.
*/
while (SSL_read_ex(stream1, buf, sizeof(buf), &readbytes)) {
/*
* OpenSSL does not guarantee that the returned data is a string or
* that it is NUL terminated so we use fwrite() to write the exact
* number of bytes that we read. The data could be non-printable or
* have NUL characters in the middle of it. For this simple example
* we're going to print it to stdout anyway.
*/
fwrite(buf, 1, readbytes, stdout);
}
/* In case the response didn't finish with a newline we add one now */
printf("\n");
In a blocking application like this one calls to SSL_read_ex(3) will
either succeed immediately returning data that is already available, or
they will block waiting for more data to become available and return it
when it is, or they will fail with a 0 response code.
Once we exit the while loop above we know that the last call to
SSL_read_ex(3) gave a 0 response code so we call the SSL_get_error(3)
function to find out more details. Since this is a blocking application
this will either return SSL_ERROR_SYSCALL or SSL_ERROR_SSL indicating a
fundamental problem, or it will return SSL_ERROR_ZERO_RETURN indicating
that the stream is concluded and there will be no more data available
to read from it. Care must be taken to distinguish between an error at
the stream level (i.e. a stream reset) and an error at the connection
level (i.e. a connection closed). The SSL_get_stream_read_state(3)
function can be used to distinguish between these different cases.
/*
* Check whether we finished the while loop above normally or as the
* result of an error. The 0 argument to SSL_get_error() is the return
* code we received from the SSL_read_ex() call. It must be 0 in order
* to get here. Normal completion is indicated by SSL_ERROR_ZERO_RETURN. In
* QUIC terms this means that the peer has sent FIN on the stream to
* indicate that no further data will be sent.
*/
switch (SSL_get_error(stream1, 0)) {
case SSL_ERROR_ZERO_RETURN:
/* Normal completion of the stream */
break;
case SSL_ERROR_SSL:
/*
* Some stream fatal error occurred. This could be because of a stream
* reset - or some failure occurred on the underlying connection.
*/
switch (SSL_get_stream_read_state(stream1)) {
case SSL_STREAM_STATE_RESET_REMOTE:
printf("Stream reset occurred\n");
/* The stream has been reset but the connection is still healthy. */
break;
case SSL_STREAM_STATE_CONN_CLOSED:
printf("Connection closed\n");
/* Connection is already closed. Skip SSL_shutdown() */
goto end;
default:
printf("Unknown stream failure\n");
break;
}
break;
default:
/* Some other unexpected error occurred */
printf ("Failed reading remaining data\n");
break;
}
Accepting an incoming stream
Our stream2 object that we created above was a uni-directional stream
so it cannot be used to receive data from the server. In this
hypothetical example we assume that the server initiates a new stream
to send us back the data that we requested. To do that we call
SSL_accept_stream(3). Since this is a blocking application this will
wait indefinitely until the new stream has arrived and is available for
us to accept. In the event of an error it will return NULL.
/*
* In our hypothetical HTTP/1.0 over QUIC protocol that we are using we
* assume that the server will respond with a server initiated stream
* containing the data requested in our uni-directional stream. This doesn't
* really make sense to do in a real protocol, but its just for
* demonstration purposes.
*
* We're using blocking mode so this will block until a stream becomes
* available. We could override this behaviour if we wanted to by setting
* the SSL_ACCEPT_STREAM_NO_BLOCK flag in the second argument below.
*/
stream3 = SSL_accept_stream(ssl, 0);
if (stream3 == NULL) {
printf("Failed to accept a new stream\n");
goto end;
}
We can now read data from the stream in the same way that we did for
stream1 above. We won't repeat that here.
Cleaning up the streams
Once we have finished using our streams we can simply free them by
calling SSL_free(3). Optionally we could call SSL_stream_conclude(3) on
them if we want to indicate to the peer that we won't be sending them
any more data, but we don't do that in this example because we assume
that the HTTP application protocol supplies sufficient information for
the peer to know when we have finished sending request data.
We should not call SSL_shutdown(3) or SSL_shutdown_ex(3) on the stream
objects since those calls should not be used for streams.
SSL_free(stream1);
SSL_free(stream2);
SSL_free(stream3);
SEE ALSO
ossl-guide-introduction(7), ossl-guide-libraries-introduction(7),
ossl-guide-libssl-introduction(7) ossl-guide-quic-introduction(7),
ossl-guide-quic-client-block(7)
COPYRIGHT
Copyright 2023 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file LICENSE in the source distribution or at
<https://www.openssl.org/source/license.html>.
3.2.2 2025-01-2OSSL-GUIDE-QUIC-MULTI-STREAM(7ossl)